Home arrow Library arrow Glossary

Home
Services
About Us
Slabs/Tiles Selection
Alternative Materials
Product Details
Photo Gallery
Contact
Library
FAQs
SiteMap
 
Thursday
September
2017
21
 
Glossary

STONE GLOSSARY OF "INDUCTORY TERMS"
DIMENSION STONE DESIGN MANUAL FROM MARBLE INSTITUTE OF AMERICA

a b c d e f g h i j k l m n o p q r s t u v w

A ↑a-z

Abrasive Finish - A flat and non reflective surface finish.

Abrasive Hardness (Ha) - A measure of the wearing qualities of stone for floors, stair treads, and other areas subjected to abrasion by foot traffic.

Absorption - Percentage of moisture absorbed by weight.

Acid Wash - A treatment applied to the face of a stone to achieve a texture or finish that is distressed. Chemical treatments are more effective when applied to calcareous stones than to siliceous stone types. Recently, the use of acid and other types of chemical treatments has lessened due to environmental and disposal concerns. Chemical processes have been replaced by mechanical methods for the texturing of the stone face.

Adhered - Secured and supported by adhesion of an approved bonding material over an approved backing; is used in reference to stone veneer.

Adoquin - A volcanic, quartz-based stone containing a variety of colored aggregates and pumice in a quartz matrix. Quarried in Mexico. Available in several colors.

Agglomerated Stone - A manmade product composed of crushed stone combined with resin.

Alabaster - A fine-grained and translucent variety of gypsum, generally white in color. May be cut and carved easily with a knife or saw. Term is often incorrectly applied to fine-grained marble.

Anchor - A metal fastener used for securing dimension stone to a structure. Anchor types for stonework include those made of flat stock (strap, cramps, dovetails, dowel, strap and dowel, and two-way anchors) and round stock (rod cramp, rod anchor, eyebolt and dowel, flat-hood wall tie and dowel, dowel and wire toggle bolts).

Anchorage - The means by which slabs are attached to a self-supporting structure.

Antique Finish - A finish that replicates rusticated or distressed textures. Produced through mechanical or chemical means to simulate the naturally occurring effects of the aging process.

Apron - A trim piece under a projecting stone top, stool, etc.

Arch - The curved or pointed construction over a doorway or opening. Arch shapes range from flat to semicircular or semi-elliptical to acutely painted.

Architrave - 1. The beam or lowest division of the entablature in the classical orders, spanning from column to column. 2. The decorated surrounds of a window or door at the head and jamb.

Arkose - A sandstone containing 10% or more clastic grains of feldspar. Also called arkosic sandstone, feldspathic sandstone.

Arris - An edge or angle where two surfaces meet; for example, moldings and raised edges.

Ashlar - A thin, dressed stone cut in square or rectangular shapes, typically used as a wall facing in a pattern of varying shapes and sizes.

ASI(Allied Stone Industries) - The Allied Stone Industries is made up of stone quarriers, fabricators, and the suppliers of natural building materials and related machinery and tools.

B ↑a-z
Backing Rod - A flexible and compressible type of closed-cell foam polyethylene, butyl rubber, or open-cell or closed-cell polyurethane, rounded at surface to contact sealant. It is installed at the bottom or rear of a joint. Often described as a "filler strip."

Baluster - A short post or vertical member in a series that supports a railing or coping, thus forming a balustrade. May be curved or straight.

Balustrade - An entire railing system with top rail and balusters, and sometimes including, a bottom rail.

Banker - Bench of timber or stone (may be a single block) on which stone is worked.

Basalt - A dark-colored, igneous rock commercially known as granite when fabricated as dimension stone.

Base - The bottom course of a stone wall, or the vertical first member above grade of a finished floor.

Bearing Check - A slot cut into the back of dimension stone to allow entry of a supporting angle or clip.

Bed - 1. The top or bottom of a joint, natural bed; surface of stone parallel to its stratification. 2. In granites and marbles, a layer or sheet of the rock mass that is horizontal, commonly curved and lenticular, as developed by fractures. Sometimes also applied to the surface of parting between rock sheets. 3. In stratified rocks, the unit layer formed by sedimentation; of variable thickness, and commonly tilted or distorted by subsequent deformation. It generally develops a rock cleavage, parting, or jointing along the planes of stratification.

Bevel - A sloped surface contiguous with a vertical or horizontal surface.

Bleed - Staining caused by corrosive metals, oil-based putties, mastics, caulking, or sealing compounds.

Blending - The proper positioning of adjacent veneer panels, floor slabs, or tiles, by their predominant color.

Block - See Quarry Block.

Block Cutter - A machine used in the quarrying process for in-line drilling of small diameter holes.

Bluestone - A fine to medium-grain, metamorphic, quartz-based stone of the U.S. Appalachian Plateau and other regions of the world. Formed in the Devonian Period, the upper stone is green and lilac in color, while the middle stone is dark gray and blue.

Bollard - A free-standing stone post or guard.

Bond - 1. Overlapping of joints in successive courses. 2. To stick or adhere.

Book Match Pattern - A layout in pairs of all stone elements to confirm that the design matches.

Bowing - A warping or curving of the wall cladding.

Brecciated marble - Any marble composed of angular fragments.

Brownstone - A trade term applied to ferruginous dark brown and reddish-brown askosic quartz-based stone extensively used for construction in the U.S. during the 19th century. Stone for New York City's noted "brownstone fronts" came from the Connecticut Valley in Massachusetts, southeastern Pennsylvania, and New Jersey.

BSI (Building Stone Institute) - A trade association, founded in 1919, of quarriers, fabricators, dealers, and others working with natural stone. Sponsor of the Tucker Architectural Awards.

Bullnose - Convex rounding of a stone member, such as a stair tread.

Bush hammering - A mechanical process which produces textured surfaces that vary from subtle to rough.

Buttering - Placing mortar on stone units with a trowel before setting them into position.

Butt Joint - An external corner formed by two stone panels with one head.

C ↑a-z
Calcite - A crystalline variety of limestone containing not more than 5% magnesium carbonate.

Calibration - The first step in the finishing process of a stone tile. Coarse abrasives pads are mounted to the bottom of rotating wheels that under extreme pressure and rotation speed are applied to the face of the stone. This process grinds the stone to a uniform and consistent thickness of + 1 mm tolerance, which is crucial for the installation of tile in a thin-set application. Calibration is applicable only to dense stones that can take a honed or polished finish, such as limestone, marble, and granite tile. The term is often erroneously applied to slates, quartzites, and other cleft - face stones, where the precision of the calibration process is not possible. Sawn-back or ground-back techniques are applied to these types of stones, and are correctly called "gauging," which is not as precision-oriented as calibration.

Canopy - A sheltering roof, as over a niche or a doorway.

Cantera - A volcanic, quartz-based stone with qualities similar to adoquin, but not as dense. Quarried in Mexico.

Cap or Capital - The culminating stone at the top of a column or pilaster, often richly carved.

Carve - To shape a solid material such as stone by precisely cutting it with a tool.

Cavity Wall - Masonry wall built with a continuous air space between the outer masonry, typically brick or stone, and the inner wall, typically concrete block or frame construction. Water that penetrates the outer masonry in driving rain runs down through the cavity and is directed out at the bottom through weep holes. See Weep Holes.

Caulking - Closing a joint by sealing with an elastic, adhesive compound.

Cavity Vent - An opening in joints of stone veneer to allow the passage of air and moisture from inside the wall cavity to the exterior. The vents may be weep holes, plastic tubing, or wicks.

Chamfer - To cut away the edge where two surfaces meet in an external angle, leaving a bevel at the junction.

Cladding - An exterior veneer stone covering.

Cleft Finish - Rough-surfaced stones such as slates that are cleaved or separated along a natural seam are referred to as natural cleft. These types of stones were formed as a result of metamorphic foliation.

Cobblestone - A dimension stone large enough for use in paving. A term commonly used to describe paving blocks, usually granite, and generally cut to rectangular shapes.

Colonnade - A range of columns supporting an entablature or one side of a roof.

Column - A vertical support, usually consisting of a base, shaft, and capital.

Conglomerate - A coarse-grained sedi-mentary rock, with clast grains larger than 2 mm.

contractor - Company or person that erects and installs fabricated dimension stone.

Control Joint - A joint that allows for dimensional changes of different parts of a structure due to shrinkage, expansion, variations in temperature, or other causes. Its purpose is to prevent development of high stresses in the structure.

Coping - A flat stone used as a cap on freestanding walls.

Coquina - Limestone composed pre-dominantly of shells or fragments of shells loosely cemented by calcite. Coquina is coarse-textured and has a high porosity. The term is applied principally to a very porous rock quarried in Florida.

Corbel Plates - Plates of nonferrous metal fixed into a structure to support stone cladding at intervals and over openings in such a way as not to be visible.

Cornice - Any projecting ornamental molding that crowns or finishes the top of a building or wall.

Course - A horizontal range of stone units the length of a wall.

Coursed Veneer - A veneer achieved by using stones of the same or approximately the same height. Horizontal joints run the entire length of the veneered area. Vertical joints are constantly broken, so that no two joints will be over one another.

Cove Base - A concave stone molding. See Base.

Cove Molding - A concave molding, typically found at the sloped or arched junction of a wall and ceiling.

Cramp - A U-shaped metal anchor used to hold two adjacent units of stone together.

Crowfoot (Stylolite) - Also known as a stylolite, a dark grey or black zigzag mark occurring in stone. It usually does not affect the structural soundness of the stone.

Cubic Stone - Dimension units more than 2 inches thick.

Cultured Marble - An artificial, manmade product resembling marble.

Curbing - Slabs or blocks of stone bordering streets, walks, etc.

Curtain Wall - Stone cladding supported by an anchoring system. Used to protect a building from the elements.

Cushion - A resilient pad placed between adjoining stone units and other materials to absorb or counteract severe stresses.

D ↑a-z
Dentil Course - Mold course immediately below the cornice, having on one of its members small, uniformly spaced blocks referred to as "dentils."

Diamond Sawed - Finish produced by sawing with diamond-toothed circular or gang saw.

Die - A covering layer of interior stone from wall to ceiling.

Dimension - stone A natural building stone that has been cut and finished to specifications.

Dolomite - A crystalline variety of limestone containing in excess of 4-0 percent magnesium carbonate as the dolomite molecule.

Dovetail Slot - A continuous groove with a trapezoid section resembling a dove's tail. Used to hold support rods in the back of the stone element.

Dowel - A short piece of nonferrous metal or slate fixed into a mortice or sinking in the joints of adjoining stones to prevent movement.

Dressing - The shaping and squaring of blocks for storage and shipment. Sometimes called "scabbing."

Drip - A recess cut into the underside of projecting stone to divert and prevent water from running down the face of a wall or other surface of which it is a part.

Dry Seam - An unhealed fracture in stone which may be a plane of weakness.

Dual Finish - Two finishes, such as thermal and polished, on one piece of stone.

E ↑a-z
Eaves - The underside of a sloping roof that overhangs a wall.

Efflorescence - A salt deposit, usually in the form of a white powder residue, that forms on the surface of stone, brick, or mortar. It is caused by alkalies leached from the masonry and carried to the surface by moisture.

Elevation - A drawing of the vertical faces and elements of a structure, either interior or exterior.

Engineered Stone - A manmade product composed of a blend of natural minerals and manmade agents (such as polyester, glass, epoxy, and other such ingredients). This product can give the appearance of a "stonelike" surface, but it does not possess the characteristics of a natural stone. It's range of use is limited.

Entablature - A composite beam member carried by columns and made up of an architrave (bottom), frieze (middle), and cornice (top).

Entasis - The curve resulting from the gradual diminishing of the diameter of the upper two - thirds of a column.

Epoxy Resin - A flexible, usually thermal-setting resin made by the polymerization of an epoxide; used as an adhesive.

Erection - The process of setting vertical dimension stone into place.

Expansion Anchor or Bolt - A socket that grips a drilled hole in stone by expanding as the bolt is screwed into it.

Expansion-Contraction Joint - A joint between stone units designed to expand or contract with temperature change or structural movement.

Exposed Face - The visible side of any stone element.

F ↑a-z
Fabricated - Used in reference to dimension stone, it means manufactured and ready for installation.

Face - The exposed surface of stone on a structure.

Fascia - Any relatively narrow, flat, horizontal structural element, such as the part covering the joint between the top of a wall and the projecting eaves.

Fieldstone - Rough, irregularly shaped pieces of stone, used for various building applications such as freestanding, walls, veneers, walkways, and garden bed linings.

Filler Strip - See Backing Rod.

Filling - A trade expression used to indicate the filling of natural voids in stone units with cements or synthetic resins and similar materials.

Fines - The powder, dust, silt-sized or sand-sized material resulting from processing, usually crushing, of stone.

Finish - Final surface applied to the face of dimension stone during fabrication.

Flagstone - Thin slabs of stone used for paving-, surfaces such as walks, driveways, and patios. They are generally flne - grained bluestone, other quartz-based stone, or slate, but thin slabs of other stones may also be used.

Flamed finish - See Thermal Finish.

Fleuri Cut - To cut quarried marble or stone parallel to the natural bedding plane.

Fluting - Shallow, concave, parallel grooves running vertically on the shaft of a column, pilaster, or other surface.

Frieze - 1. A decorated band along the upper part of an interior wall. 2. The middle member of the entablature, located above the architrave and below the cornice.

G ↑a-z
Gang Saw - A mechanical device, also known as a "frame saw," used to cut stone blocks to slabs of predetermined thickness.

Gauged or Gauging - A grinding process to make all pieces of material to be used together the same thickness.

Glass Seam - Vein fillings of coarsely crystalline calcite, which do not necessarily decrease the strength of the stone.

Grain - 1. The main direction of the mineral composition and arrangement in stone; it is also the easiest direction of cleavage. 2. A very small particle of rock, such as a sand grain.

Granite - A very hard, crystalline, igneous rock, gray to pink in color, composed of feldspar, quartz, and lesser amounts of dark ferromagnesium materials. Gneiss and black "granites" are similar to true granites in structure and texture, but are composed of different minerals.

Greenstone - A metamorphic rock, typically with poorly defined granularity, ranging in color from medium-green or yellowish-green to black.

Grout - Mortar used to fill joints.

Guide Specification - A recommended specification for the finishing and installation of dimension stone.

H ↑a-z
Hand or Machine Pitch-Faced (Rock-Faced) Ashlar - A rustic finish for veneer stone created by chiseling the stone face, usually with a hammer.

Head - The exposed surface of die jointed end of any given piece of stone with a gauged dimension not more than the minimum thickness of the material specified. Also known as "return head."

Hone Finish - A satin-smooth surface finish with little or no gloss, recommended for commercial floors.

I ↑a-z
Igneous - Any of the various volcanic rocks, solidified after the molten state, such as granite.

ILI (Indiana Limestone Institute) - A trade organization established for the dissemination of information on limestone standards, recommended practices, grades, colors, finishes, and all technical data required for specifying, detailing, fabricating, mid erecting Indiana Limestone. Publishers of the Indiana Limestone Handbook and other technical publications.

Impregnation - Applying a chemical containing stain inhibitors that penetrates below the surface of the stone.

Incise - To cut inwardly or engrave, as in an inscription.

J ↑a-z
Joint - A space between installed stone units or between a dimension stone and the adjoining material.

Jointing Scheme - Architectural drawing detailing dimensions, location, and configuration of stone units and joints as related to structure.

K ↑a-z
Kerf - A slot cut into the edge of a stone with a saw blade for insertion of anchors.

Keystone - The central stone of an arch, sometimes sculpted or otherwise embellished.

L ↑a-z
Lamination - The gluing of two pieces of stone together to produce an edge that can be shaped to create an aesthetic appearance for countertops.

Lewis Bolt - A bolt with a large, tapered head, fixed into stone or masonry, and sometimes used as a permanent support.

Lewis Pin - A pin (3/8" or 112") usually with an eye at the upper end. It is used in pairs to lift cubic stones for installation.

Limestone - A sedimentary rock composed primarily of calcite or dolomite. The varieties of limestone used as dimension stone are usually well consolidated and exhibit a minimum of graining or bedding direction.

Liners - Structurally sound sections of stone cemented and doweled to the back of thin stone units to give greater strength, additional bearing surface, or to increase joint depth.

Lintel - A horizontal beam or stone over the opening of a door or window that carries the weight of the wall above it.

Lippage - A condition where one edge of a stone is higher than adjacent edges, giving the finished surface an uneven appearance.

M ↑a-z
Marble - A metamorphic crystalline rock composed predominantly of crystalline grains of calcite, dolomite, or serpentine, and capable of taking a polish.

Marble (Commercial Definition) - A cry-stalline rock, capable of taking a polish, and composed of one or more of the minerals calcite, dolomite, and serpentine.

Metamorphic Rock - Rock altered in appearance, density, crystalline structure, and in some cases, mineral composition, by high temperature or intense pressure, or both. Includes slate derived from shale, quartz-based stone from quartzitic sand, and true marble from limestone.

MIA (Marble Institute of America) - An international trade association whose membership is composed of producers, fabricators, contractors, exporters, importers, distributors, sales agents, and those who sell products and services to the dimension stone industry and building owners.

Miter - The junction of two units at an angle. The junction line usually bisects on a 45° angle.

Mockup - See Shop Drawings.

Modular Multiple Cut - Also called "pattern cut", refers to standard patterns used throughout the stone industry that are usually based on multiples of a given height. Stone that is multiple-cut or pattern-cut is precut to allow typically for 1/4" to 1/2" joints or beds.

Mullion - A vertical member that divides a window or other opening into two or more panes. Sometimes, it is only an ornamental overlay.

N ↑a-z
NBGQA (National Building Granite Quarries Association) - A trade association whose membership is composed of granite producers in the United States. Collectively, these companies provide a major portion of the architectural granite produced in the U. S.

NTCA (National Tile Contractors Association) - A trade association whose active membership consists of contractors in the United States, with an associate membership of those who supply products and services to die industry.

Natural Stone - A product of nature. A stone such as granite, marble, limestone, slate, travertine, or sandstone that is formed by nature, and is not artificial or manmade.

Niche - A recess in an interior or exterior wall usually for a statue or an urn, and typically semicircular in design.

Nonstaining Mortar - Mortar composed of materials which individually or collectively do not contain material that will stain, usually having a very low alkali content.

Notch - A V-shaped cut made on the edge or head of a stone.

O ↑a-z
Off Fall - A remnant, or extra piece, from a partially cut slab. Off falls are often used for samples or additional projects.

Ogee - A stone molding with a reverse curved edge: concave above, convex below.

Onyx - A translucent, generally layered, cryptocrystalline calcite with colors in pastel shades, particularly yellow, tan, and green.

Oolitic Limestone - A calcite-cemented cal-careous stone formed of shells and shell fragments, practically noncrystalline in character. It is found in massive deposits located almost entirely in Lawrence, Monroe, and Owen Counties, Indiana; and in Alabama, Kansas, and Texas. This limestone is characteristically a freestone, without cleavage planes, possessing a remarkable uniformity of composition, texture, and structure. It possesses a high internal elasticity, adapting itself without damage to extreme temperature changes

P ↑a-z
Palletizing - A system of stacking stone on wooden pallets. Stone delivered palletized is easily moved and transported by modern handling equipment. It generally arrives at the job site in better condition than unpalletized material.

Panel - A single unit of fabricated stone veneer.

Parging - Applying a coat of mortar to the back of stone units, or to the face of the backup material.

Parapet - 1. a low wall to protect the edge of a terrace, roof, or balcony. 2. The portion of wall above the roof of a building.

Paver - A single unit of fabricated stone for use as an exterior paving material.

Pedestal - In classical architecture, the support for a column or statue, consisting of a base, dado, and cap.

Pediment - The gable end of a roof in classical architecture. Located above a horizontal cornice member, it comprises the raking cornices and the tympanum. It is typically triangular, but can also be curved when applied as a decorative element over windows.

Pergola - Garden structure formed by two rows of posts or pillars with joists and open framing above, often covered by climbing plants and shading a walkway.

Pilaster - A shallow, engaged pier or column projecting from a wall, typically decorative.

Pitched stone - A rough stone face or edge, cut with a pitching chisel.

Plinth - 1. The base block at the junction of the stone base and trim around a door or other opening. 2. The bottom stone block of a column or pedestal.

Pointing - The final filling and finishing of mortar joints that have been raked out.

Polished Finish - A glossy surface finish that brings out the full color and character of the stone.

Porphyry - An igneous rock characterized by distinct and contrasting sizes of coarse and fine-grained crystals. Used as a decorative building stone.

Portico - A porch formed by a roof supported with columns, similar to a temple front.

Privacy Partition - A thin stone panel between urinals. See Urinal Screen.

Producer - Company or person that quarries and supplies dimension stone to the commercial market.

Q ↑a-z
Quarrier - Company or person that extracts natural stone from a quarry.

Quarry - The location of an operation where a deposit of stone is extracted from the earth through an open pit or underground mine.

Quarry Block - Generally, a rectangular piece of rough stone as it comes from a quarry, frequently dressed (scabbed) or wire-sawed for shipment.

Quartz-Based Stone - A stone that may be either sedimentary in formation (as in sandstone, or metamorphic, as in quartzite).

Quartzite - A metamorphic quartz-based stone formed in exceedingly hard layers. In some deposits, intrusion of minerals during the formation process create unusual coloration.

Quirk-Miter - Linear edge work for corner joints.

Quirk-Miter Joint - An external corner formed by two stone panels at an angle, with meeting edges mitered and with exposed portions finished.

Quoin - One of the decorative dressed stones or bricks used at the corner of a building. Quoins are usually laid so their faces are alternately large and small.

R ↑a-z
Random Slab - A trimmed slab with a width and length that is not preset, but variable within certain limits.

Rabbet - A groove cut into the surface along an edge so as to receive another piece similarly cut.

Rake - An angular cut on the face of a stone.

Rebated Kerf - An additional cut that countersinks a kerf from the back edge of the kerf to the back edge of another piece of stone for the purpose of additional anchor clearance. It is not a gauged cut. If used for a bearing surface, it must be shimmed to allow for tolerance in the cut.

Reglet - A narrow, flat, recessed molding, or a kerf cut to receive flashing.

Reinforcement - A fabrication technique, often called "rodding," that refers to the strengthening of unsound marble and limestone by cementing rods into grooves or channels cut into the back of the stone unit. Another method of reinforcement is the lamination of fiberglass to the back of tile units.

Relief - Carving or embossing raised above a background plane, as in a bas-relief.

Resin - A chemical product, clear to translucent, used in some coating processes.

Return - The right-angle turn of a molding.

Reveal - The exposed portion of a stone between its outer face and a window or door set into an opening.

Rise - The height of a stone, generally used in reference to veneer stone.

Rock (Pitch) Faced - Similar to split faced, except that the face of the stone is pitched to a given line and plane, producing a bold appearance rather than the comparatively straight face obtained in split face.

Rodding - See Reinforcement.

Rough Sawn - A surface finish resulting from the gang sawing process.

Rubble - A term applied to dimension stone used chiefly for walls and foundations, consisting of irregularly squared pieces, partly trimmed or squared, generally with one split or finished face, and selected and specified with a size range.

Rustication - Exterior masonry cut in large blocks with deeply chamfered joints. Surfaces can be smooth or rough-textured, and joints and faces can have various treatments.

S ↑a-z
Saddles - See Thresholds.

Sample - A piece of dimension stone, usually 12" x 12", showing the general range of color, markings, and finish of a given variety of stone.

Sandblasted - A matte-textured surface finish with no gloss, finished by application of a steady flow of sand and water under pressure.

Sandstone - See Quartz-Based Stone.

Sawed Edge - A clean-cut edge generally achieved by cutting with a diamond blade, gang saw, or wire saw.

Sawed Face - A finish obtained from the process used in producing blocks, slabs, or other units of building stone. It varies in texture from smooth to rough, and is typically named for the type of material used in sawing, e.g. diamond sawn, sand sawn, chat sawn, and shot sawn.

Scabbing - See Dressing.

Sculpture - The work of a sculptor cutting a three-dimensional form from a block of stone.

Sealant - An elastic adhesive compound used to seal stone veneer joints.

Sealing - 1. To make a veneer joint watertight with an elastic adhesive compound. 2. Application of a treatment to retard staining.

Sedimentary - Rocks formed of sediments laid down in successive strata or layers. The materials of which they are formed are derived from preexisting rocks or the skeletal remains of sea creatures.

Serpentine - A hydrous magnesium silicate material; generally dark green in color with markings of white, light green, or black. Considered commercially as a marble because it can be polished.

Setter - An experienced journeyman who installs dimension stone.

Setting - The trade of installing dimension stone.

Setting Space - The distance from the finished face of a stone unit to the face of the backup material.

Shim - A piece of plastic or other noncorrosive, nonstaining material used to hold joints to size.

Shop Drawing - A detailed fabrication and installation drawing showing dimensions and methods of anchorage.

Shop Ticket - Also referred to as a "cutting" or "cut" ticket, it is generally produced by the stone fabricator or shop for in-house use and reference. A shop ticket is produced for each differing piece of stone required for a project and is referenced to shop drawings which are used for communicating intent with parties outside of the fabricating team or shop.

Sill - The bottom horizontal part of a window or opening in a structure.

Simulated Stone - An artificial manmade product that resembles stone.

Slab - A lengthwise-cut piece sawn or split from a quarry block prior to fabrication.

Slate - A very fine-grained metamorphic rock derived from sedimentary shale rock. Characterized by an excellent parallel cleavage, and entirely independent of original bedding, slate may be split easily into relatively thin slabs.

Soapstone - A massive talc with a "soapy" feel, used for hearths, tabletops, chemical - resistant laboratory tops, stove facings, and cladding; known for its stainproof characteristics.

Soffit - The underside of any architectural element, such as an arch, beam, lintel, or balcony.

Soundness - A property of stone used to describe relative freedom from cracks, faults, voids, and similar imperfections found in untreated stone. One of the characteristics encountered in fabrication.

Spall - A chip or splinter separated from the main mass of a stone.

Spandrel -1. The triangular area between an arch and a wall, or between two arches. Often decorated. 2. In modern high-rise construction, the blank wall panel between the top of one window and the bottom of the one above it. Can be made of stone, metal, or glass.

Splay - A beveled or slanted surface.

Split - Division of a rock by cleavage.

Split-Faced Stone - Stone on which the face has been broken to an approximate plane.

Spot or Spotting - The mortar applied to the back of dimension stone veneer to bridge the space between a stone panel and the backup wall. Used to plumb a wall.

stacked bond Stone that is cut to one dimension and installed with unbroken vertical and horizontal joints running the entire length and height of the veneered area.

Sticking - The butt edge repair of a broken piece of stone, now generally done with dowels, cements, or epoxies. The pieces are "stuck" together; thus "sticking."

Stool - A flat unit of stone, often referred to as an interior windowsill.

T ↑a-z
TCA (Tile Council Of America) - An organization of manufacturers serving the ceramic tile industry. IV, programs include promotion of the uses of tile, improvement of product standards and quality, development of new installation methods and techniques, and publication of the annual Installation Handbook. Many of the installation techniques detailed in the handbook can be used to set stone tile.

Template - A pattern for a repetitive marking or fabricating operation.

Terrazzo - A flooring surface of marble or granite chips in a cementitious or resinous matrix, which is ground and finished after setting.

Texture - Surface quality of stone independent of color.

Textured Finish - A rough surface finish.

Thermal Finish - A surface treatment applied by intense heat flaming.

Thin Stone - Dimension stone units less than 2" thick.

Threshold - A flat strip of stone projecting above the floor between the jambs of a door. Also known as a "saddle."

Tile - A thin modular stone unit, generally less than 3/4" thick.

Tolerance - Dimensional allowance in the fabrication process.

Translucence - The ability of many lighter-colored marbles to transmit light.

Travertine - A variety of limestone that is a precipitate from hot springs. Some varieties of travertine take a polish and are known commercially as marble.

Tread - A flat stone used as the top walking surface on steps.

Trim - The framing or edging of openings and other features on the interior or exterior of a building, including baseboards, picture rails, cornices, and casings.

Tumbled Finish - A weathered, aging finished created when the stone is tumbled with sand, pebbles, or steel bearings.

U ↑a-z
Unit - A piece of fabricated cubic or thin dimension stone.

Undercut - Cut so as to present an overhanging part.

Urinal Screen - A thin stone panel used as a privacy partition between urinals.

V ↑a-z
Vein - A layer, seam, or narrow irregular body of mineral material different from the surrounding formation.

Vein Cut - A cut into quarried stone perpendicular to the natural bedding plane.

Veneer - An interior or exterior stone wall covering layer.

Venting - See Cavity Vent.

W ↑a-z
Wainscot - An interior veneer of stone covering the lower portion of an interior wall.

Wash - The slope on the top of a stone unit intended to shed water.

Water-Jet Finish - A surface treatment performed by using water under extreme high pressure.

Waxing - The practice of filling minor surface imperfections such as voids or sand holes with melted shellac, cabinetmaker's wax, or certain polyester compounds. In the dimension stone industry, it does not refer to the application of paste wax to make surfaces shinier.

Weathering - Natural alteration by either chemical or mechanical processes due to the action of constituents of the atmosphere, soil, surface waters, and other ground waters, or by temperature changes.

Weep Holes - Openings for drainage in veneer joints or in the structural components supporting the veneer.

Wire Sawing - A method of cutting stone by passing a twisted, multistrand wire over the stone. The wire may either be immersed in a slurry of abrasive material or be fitted with spaced industrial diamond blocks.

 
Next >